|
Page 1 of 1
|
[ 8 posts ] |
|
Author |
Message |
GuuTarE
Rookie
Joined: Thu Jun 25, 2015 1:37 am Posts: 4
|
 EV3 datalog
Hello, For datalogTest of EV3, when I run a code such as the following about ten times or increase the number of iterations, 'Failure Reading brick status more' displayed at the left edge of the screen and EV3 freezes. Why is this such a thing happen? Cause is not know. we are very troubled. (Firmware:EV3 LinuxImage_107X)
|
Thu Jun 25, 2015 2:35 am |
|
 |
mightor
Site Admin
Joined: Wed Mar 05, 2008 8:14 am Posts: 3654 Location: Rotterdam, The Netherlands
|
 Re: EV3 datalog
Hey there, Here's a modified robotc.so firmware file. To upload the new ROBOTC firmware, perform the following steps: Set the menu level to "Expert" by navigating to the Window menu and click on "Menu Level": https://imgur.com/DYWVTj8Next download the custom firmware by clicking on the Choose File from the Robot->Download Firmware sub menu: https://imgur.com/VZEaiTGSelect the robotc.so file that I have included in this zip file. Wait while the file is loaded onto your brick (should not take long) Regards, Xander
_________________| Professional Conduit of Reasonableness| (Title bestowed upon on the 8th day of November, 2013) | My Blog: I'd Rather Be Building Robots| ROBOTC 3rd Party Driver Suite: [ Project Page]
|
Sat Jun 27, 2015 9:36 am |
|
 |
GuuTarE
Rookie
Joined: Thu Jun 25, 2015 1:37 am Posts: 4
|
 Re: EV3 datalog
Thanks for your response. Like you said, I uploaded the new ROBOTC firmware. However, the problem wasn't solved. There is no change. Is there anything else that I have to improve? 
|
Tue Jun 30, 2015 1:56 am |
|
 |
mightor
Site Admin
Joined: Wed Mar 05, 2008 8:14 am Posts: 3654 Location: Rotterdam, The Netherlands
|
 Re: EV3 datalog
I assume you are using ROBOTC 4.32? If not, you must upgrade first, install the 1.07X Linux kernel and then the firmware I gave you.
= Xander
_________________| Professional Conduit of Reasonableness| (Title bestowed upon on the 8th day of November, 2013) | My Blog: I'd Rather Be Building Robots| ROBOTC 3rd Party Driver Suite: [ Project Page]
|
Tue Jun 30, 2015 2:16 am |
|
 |
GuuTarE
Rookie
Joined: Thu Jun 25, 2015 1:37 am Posts: 4
|
 Re: EV3 datalog
Yes,I'm using ROBOTC 4.32(F/W:10.32)
OS:Windows 7 Enterprise(JPN) Region and Language:English
|
Tue Jun 30, 2015 2:43 am |
|
 |
mightor
Site Admin
Joined: Wed Mar 05, 2008 8:14 am Posts: 3654 Location: Rotterdam, The Netherlands
|
 Re: EV3 datalog
I am sorry but with the new librobotc.so, I cannot reproduce your issue. Could you please try uploading the new firmware again and make sure you use the librobotc.so that I attached to the previous post?
= Xander
_________________| Professional Conduit of Reasonableness| (Title bestowed upon on the 8th day of November, 2013) | My Blog: I'd Rather Be Building Robots| ROBOTC 3rd Party Driver Suite: [ Project Page]
|
Tue Jun 30, 2015 3:17 am |
|
 |
GuuTarE
Rookie
Joined: Thu Jun 25, 2015 1:37 am Posts: 4
|
 Re: EV3 datalog
Hi I have just solved the problem!!笑 I installed 1.07X Linux kernel and uploaded firmware again. Thank you HAHAHA 
|
Wed Jul 01, 2015 9:41 pm |
|
 |
mightor
Site Admin
Joined: Wed Mar 05, 2008 8:14 am Posts: 3654 Location: Rotterdam, The Netherlands
|
 Re: EV3 datalog
I am very glad to hear that! Thank you for letting me know  = Xander
_________________| Professional Conduit of Reasonableness| (Title bestowed upon on the 8th day of November, 2013) | My Blog: I'd Rather Be Building Robots| ROBOTC 3rd Party Driver Suite: [ Project Page]
|
Thu Jul 02, 2015 1:23 am |
|
|
|
Page 1 of 1
|
[ 8 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|