ROBOTC.net forums
http://robotc.net/forums/

Reading sensor's value through motor port on EV3
http://robotc.net/forums/viewtopic.php?f=1&t=13907
Page 1 of 1

Author:  sergeyzwezdin [ Sun Apr 10, 2016 10:27 am ]
Post subject:  Reading sensor's value through motor port on EV3

Both motor and sensor ports implements I2C protocol. I wonder whether it's possible to read sensor's state by using motor port?

Any samples would be very helpful as well. Thank you!

Author:  CARBOT [ Sun Apr 10, 2016 8:00 pm ]
Post subject:  Re: Reading sensor's value through motor port on EV3

This page has information on the difference between the sensor ports and motor ports:
http://www.dexterindustries.com/shop/breadboard-adapter-lego-mindstorms/

Author:  mightor [ Mon Apr 11, 2016 1:06 am ]
Post subject:  Re: Reading sensor's value through motor port on EV3

The motor ports most definitely do not use I2C, at least not with the standard firmware. You cannot read sensors with the motor ports.

= Xander

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/