ROBOTC.net forums
http://robotc.net/forums/

VEXnet 2.0 Upgrade Issue
http://robotc.net/forums/viewtopic.php?f=11&t=13027
Page 1 of 1

Author:  1024twilson [ Wed Dec 30, 2015 2:12 pm ]
Post subject:  VEXnet 2.0 Upgrade Issue

I'm having trouble updating to the VEXnet 2.0.

After updating the VEXnet keys to 2.0 and the joystick firmwear and Cortex firmware and master firmware to 4.25 the joystick and Cortex appear to link on the tether (3 green joystick lights) but not with the keys (on joystick: "JOYSTICK" light green, "VEXnet" light flashing rapidly).

With the tether in place all programmed motors (RobotC sample programs loaded normally using tether) run for three seconds at Cortex turn-on but do not respond to joystick inputs. With or without VEXnet keys installed all programmed motors run continuously at Cortex turn-on.

All VEX updates were done on a Windows 7 PC on the school's network running RobotC 4.52.

What am I doing wrong?

Author:  Tabor473 [ Fri Jan 01, 2016 11:43 am ]
Post subject:  Re: VEXnet 2.0 Upgrade Issue

1024twilson wrote:
I'm having trouble updating to the VEXnet 2.0.

After updating the VEXnet keys to 2.0 and the joystick firmwear and Cortex firmware and master firmware to 4.25 the joystick and Cortex appear to link on the tether (3 green joystick lights) but not with the keys (on joystick: "JOYSTICK" light green, "VEXnet" light flashing rapidly).

With the tether in place all programmed motors (RobotC sample programs loaded normally using tether) run for three seconds at Cortex turn-on but do not respond to joystick inputs. With or without VEXnet keys installed all programmed motors run continuously at Cortex turn-on.

All VEX updates were done on a Windows 7 PC on the school's network running RobotC 4.52.

What am I doing wrong?


Did you update the firmware for the keys? That is the new step that 2.0 keys require. Also just for clarity under robot is compiler mode set to usb and joystick?

Author:  1024twilson [ Sun Jan 03, 2016 12:11 am ]
Post subject:  Re: VEXnet 2.0 Upgrade Issue

Thanks for the response.

The keys are updated to key firmware version 1.46.

The communication mode was USB only.

Author:  Tabor473 [ Mon Jan 04, 2016 11:34 pm ]
Post subject:  Re: VEXnet 2.0 Upgrade Issue

Does changing the USB to not be USB only resolve the issue?

Author:  1024twilson [ Tue Jan 05, 2016 10:04 am ]
Post subject:  Re: VEXnet 2.0 Upgrade Issue

Yes! Thank you!

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/