ROBOTC.net forums
http://robotc.net/forums/

Joystick not recognized
http://robotc.net/forums/viewtopic.php?f=11&t=3484
Page 1 of 1

Author:  Vexinator [ Mon Sep 19, 2011 10:40 pm ]
Post subject:  Joystick not recognized

Hello,
I'm trying to download the firmware to the joystick, but my Windows 7, 64 bit pc does not recognize the device when I plug it in while pressing the config button. I was able to get the Cortez recognized and downloaded after re-installing a couple of times. I've gone throught the doc and process many times.
Is the joystick driver included in the same vex driver download or do I need something else? I also noticed that I have the NXT drivers loaded from last year during FLL. Could this be a conflict? I'm coaching a new Vex team of young kids and would appreciate any ideas.
Thanks.
Bill

Author:  jbflot [ Tue Sep 20, 2011 5:18 pm ]
Post subject:  Re: Joystick not recognized

Hi Bill,

The driver for the Cortex is the same one for the Joystick. What error message are you getting?

Author:  Vexinator [ Tue Sep 20, 2011 6:15 pm ]
Post subject:  Re: Joystick not recognized

Thanks for the response. When I plug it in, I get the windows message "USB Device Not Recognized". You wouldn't happen to know the device id for the Joystick or which .inf file I can look at?

Author:  Vexinator [ Tue Sep 20, 2011 7:40 pm ]
Post subject:  Re: Joystick not recognized

I got the joystick firmware downloaded by first connecting the joystick without pressing the config button. This caused the driver to be installed. Then I connected it again with the config pressed and again I got the "Usb device not recognized" windows message but the lights were blinking and I could download the firmware.
Not sure if this is the way it's supposed to work, but it worked for me and I'm on to the next step.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/