ROBOTC.net forums
http://robotc.net/forums/

Mindsensors PSP-nx
http://robotc.net/forums/viewtopic.php?f=41&t=10795
Page 1 of 1

Author:  tpaulson [ Thu Mar 26, 2015 11:18 am ]
Post subject:  Mindsensors PSP-nx

We are trying to use your mindsensors-ps2ctrl examples from the robotc mastersuite to control motors with the Mindsensors PSPnx controller. All three examples give this message in the log window.

Detected SensorType on port[0]: 0

The PSPnx is plugged into Sensor port 1. Programs have S1 as the sensor port. The example programs do use different sensor types. sensorI2CCustomFastSkipStates or sensorI2CCustom

Note: are PSPnx is the non-referee model.
RobotC Ver 4.3
EV3 brick

What is the correct sensor type that should be used with the PSP-Nx?

Author:  mightor [ Thu Mar 26, 2015 11:45 am ]
Post subject:  Re: Mindsensors PSP-nx

Make sure you are using ROBOTC 4.30 and the latest version of the driver suite, which you can download from here: https://github.com/botbench/robotcdriversuite. Change the sensor type to sensorEV3_GenericI2C and disconnect and reconnect the sensor from the EV3. The remote should work fine after that. I just tested it with the PSP-Nx-4 I have here.

= Xander

Author:  tpaulson [ Thu Mar 26, 2015 12:29 pm ]
Post subject:  Re: Mindsensors PSP-nx

We are using RobotC 4.30 and we downloaded the driver suite last night.

Changing the sensor type to sensorEV3_GenericI2C worked. Thanks

We will also be using the Mindsensors NXTServo-v3 controller. Is sensorEV3_GenericI2C the correct type for that as well?

Author:  mightor [ Thu Mar 26, 2015 12:43 pm ]
Post subject:  Re: Mindsensors PSP-nx

Should be, although I have not tested the driver with that sensor on the EV3.

= Xander

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/