ROBOTC.net forums
http://robotc.net/forums/

F310 Joystick axis converting Issue.
http://robotc.net/forums/viewtopic.php?f=52&t=5318
Page 1 of 1

Author:  Rohs [ Wed Jan 02, 2013 3:58 am ]
Post subject:  F310 Joystick axis converting Issue.

F310 Joystick axis converting Issue.

F310 joystick's Left axis sometimes transmit wrong signal.
At first time we tested the device, When I push btn 3, debug screen said Btn 5 was pushed. or Right stick worked as Z axis. These were solved by installing Joystick Driver. Anyway, There are still more problems haven't solved.

For example When I push left stick up, ROBOTC's joystick debug screen says, its fully pushed to left or so.
And Sometimes it's X,Y value indicates over 2500.

However when Joystick Driver was turned on and activated(I mean clicked and window become dark blue.)
ROBOTC's Joystick Debug screen came to normal.
But it cant be a solution you know, Same problem can occur anytime at competition.

If you had same problem or solved this, Post it please.
We need your help immedietly.

Author:  JohnWatson [ Wed Jan 02, 2013 4:17 pm ]
Post subject:  Re: F310 Joystick axis converting Issue.

Quote:
However when Joystick Driver was turned on and activated(I mean clicked and window become dark blue.)


What exactly do you mean in this particular statement? Are you able to post a screenshot of this window, or provide a link to the driver that you are using? The behavior you are experiencing with the joystick is different than the normal issues we see with joysticks, so the more detailed information you are able to provide us with, the better we will be able to assist you.

Also, you may want to take a look at our 'Using Joysticks' page on our wiki; I'm not entirely clear on what the specific issue you are having is, but the wiki page may be able to help you (it has a graphical walkthrough on using joysticks with ROBOTC).

Edit: Link to the 'Using Joysticks' page on our wiki.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/