View unanswered posts | View active topics It is currently Thu Apr 17, 2014 2:28 pm






Reply to topic  [ 20 posts ]  Go to page Previous  1, 2
New to robotics and looking for a starting platform! 
Author Message
Site Admin
Site Admin

Joined: Thu May 24, 2012 12:15 pm
Posts: 533
Post Re: New to robotics and looking for a starting platform!
NeXT-Generation wrote:
JohnWatson wrote:
I don't think any of the existing shields designed for Arduino would work because of that small gap, so it's a double-edged sword. I'll be able to make my own shields cheap and easy, but won't be able to use any of the existing shields as drop-ins. I'm going to make a thread about it once I get it all sorted out (schematic wise, it actually looks fairly simple) and I'll post all the nitty-gritty details up on there.


Maybe you could use two rows of headers? One with the normal 1/10" (or whatever it is) gap, and another with the weird Arduino gap?


The only problem is that I want to use perfboard for quick and easy prototyping of shields, and as far as I know there no quick easy way to simulate that gap (besides drilling, but then you would probably end up wrecking the entire board and making it much, much more prone to breaking).

_________________
Check out our Blog! And our Facebook page!
Need help? Take a look at our Wiki and our Forums.

I just met you,
And this is crazy,
But here's my code now,
So fix it, maybe?
~ Carly Rae Jepsen parody


Fri Jun 22, 2012 9:47 am
Profile
Expert

Joined: Thu Sep 29, 2011 11:09 pm
Posts: 184
Location: Michigan USA
Post Re: New to robotics and looking for a starting platform!
But what about placing the two rows of headers side-by-side, and having one set with "proper" spacing. If you don't understand what I mean, I could try drawing it.

BTW, the specific spacing between the GPIO headers is 160mil (on center of pins), instead of 200mil (according to the eagle .brd file for the Leonardo).

_________________
Matt


Fri Jun 22, 2012 12:24 pm
Profile WWW
Rookie

Joined: Mon May 14, 2012 3:24 pm
Posts: 43
Post Re: New to robotics and looking for a starting platform!
JohnWatson wrote:
The only problem is that I want to use perfboard for quick and easy prototyping of shields, and as far as I know there no quick easy way to simulate that gap (besides drilling, but then you would probably end up wrecking the entire board and making it much, much more prone to breaking).


John,

For $1.25 you can buy an offset header which are bent so that they mate the perfboard onto an Arduino.

You can buy them from Sparkfun http://www.sparkfun.com/products/9374

Or along with a perfboard and other headers (it is $6) from Adafruit http://www.adafruit.com/products/187

A guy named Brett Beauregard made a bunch and sells them through Sparkfun and Adafruit. He has a write up on his website about it here: http://brettbeauregard.com/blog/2009/07 ... et-header/

Image


Image


Fri Jun 22, 2012 6:17 pm
Profile
Site Admin
Site Admin

Joined: Thu May 24, 2012 12:15 pm
Posts: 533
Post Re: New to robotics and looking for a starting platform!
That is way easier and smarter than what I would have ended up doing. I'm still going to build an arduino board anyways, just to do it :) It's good to know those shields do exist, though, and that they are pretty cheap.

_________________
Check out our Blog! And our Facebook page!
Need help? Take a look at our Wiki and our Forums.

I just met you,
And this is crazy,
But here's my code now,
So fix it, maybe?
~ Carly Rae Jepsen parody


Fri Jun 22, 2012 9:14 pm
Profile
Rookie

Joined: Thu Jun 07, 2012 6:34 pm
Posts: 6
Post Re: New to robotics and looking for a starting platform!
mightor wrote:
Futura,

Perhaps it would be a good idea to start a new thread asking about the servo info. That keeps the subjects a little more separated which will help the next person to find the relevant info more easily :)

- Xander



Absolutely! I agree, on keeping these topics separately - it makes matters practical. I am an old member of Rc.Groups.com for many years, and remember spending long hours reading a large trail of threads looking for a technical question that would ultimately end up unconclusive. I have spent some great years there and now it has evolved into this - who would have ever known. :)


Fri Jun 22, 2012 10:17 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 20 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.