|
Page 1 of 1
|
[ 5 posts ] |
|
Author |
Message |
Kmnae1
Rookie
Joined: Thu Jun 25, 2015 8:32 pm Posts: 2
|
 no Communication Link
Ok I am having issues with downloading to the Robot everytime I try to download I come up with an Error box that says "No communication Link available to VEX device" I downloaded the Windows 8 Prolific USB-to-Serial Driver thinking that might be the problem since I have windows 8 on my computer but it is still doing the same thing. Please help before I go crazy.
Thanks, Kim
|
Thu Jun 25, 2015 8:37 pm |
|
 |
JohnWatson
Site Admin
Joined: Thu May 24, 2012 12:15 pm Posts: 722
|
 Re: no Communication Link
What does the VEX Cortex appear as under the Windows Device Manager when connected and turned on? Also, what COM port is selected under the 'View -> Select Communications Port' window found in ROBOTC? Please provide screenshots of both of these windows (what the Cortex appears as under the Windows Device Manager and ROBOTC's Select Communications Port window) as we will need this information in order to debug the issue further.
Thank you, John
_________________Check out our Blog! And our Facebook page! Need help? Take a look at our updated help documentation and the ROBOTC Forums.
|
Fri Jun 26, 2015 9:43 am |
|
 |
Kmnae1
Rookie
Joined: Thu Jun 25, 2015 8:32 pm Posts: 2
|
 Re: no Communication Link
The Robot is on and the Robot light is blinking green and the game light is blinking green. Thanks for the help.
|
Fri Jun 26, 2015 4:39 pm |
|
 |
DRBandy
Rookie
Joined: Wed Nov 20, 2013 10:38 am Posts: 6
|
 Re: no Communication Link
Hello, John this is David Bandy from Muskogee OK. This is a problem that I ran into last spring, and we had discussion on it. I finally solved my challenge and was able to get my cortex's upgraded. But Now that I have upgraded to 4.5, I am not able to solve this problem the same way. I was at a workshop two weeks ago (using RobotC) and this was an issue with many of the laptops that the other teachers had. Everytime we upgrade the firmware we get the "No communication link Available to VEX device".
Trying it manually, it happens after the "Master CPU Firmware" upgrade.
Now, at the workshop I was running 4.32 and it was just fine (I did not have this prob at that time). But today I upgraded to 4.5 and now I can not regain access to the cortex.... ie "no communication link available to VEX device"
Now I can reset cortex.... use "other" software and bam I am in!!!!
I go back to RobotC.... and Ditto... No Communication...
any ideas????
|
Thu Oct 08, 2015 9:27 pm |
|
 |
colincallahan
Rookie
Joined: Mon Jun 06, 2016 5:31 pm Posts: 1
|
 Re: no Communication Link
I'm getting this error (no communications link available to vex device) when trying to update the firmware. I'm on a mac running Windows 10 on a VM. Any help would be greatly appreciated.
|
Mon Jun 06, 2016 5:37 pm |
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|